← Back

SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE
SULLAGE HOSE 25MM x 10 METRE

SULLAGE HOSE 25MM x 10 METRE

$50.00 Save $-50.00
895 in stock

Get your Sullage Hose in our signature Navigator Blue!

  • 10 metre hose
  • 25mm diameter
  • Smooth core to minimise waste becoming trapped during use
  • Corrugated exterior
  • Small 12mm slit at one end to make fitting and removing easier
  • Silicone ring with Navigator branding
  • Separate SULLAGE REDUCTION ADAPTOR available for purchase if required

OUR HANDY TIPS!

Initial use - For first use, leave your hose in the sun for 10 minutes to heat up and soften. Proceed to coil it into your Navigator Sullage Buddy where it will form its natural shape.

Two hoses in one - Measure out and cut 3 metres off your full length sullage hose. This will leave you with a 3m length for off grid camping and a 7m length for your stays at caravan parks. You can then cut a 12mm slit at one end of your secondary hose to make it easy to fit and remove the sullage hose from your van's barbed end.

Don't forget to grab your Navigator Sullage Buddy to store your hose!

THIS ITEM IS EXCLUSIVE TO NAVIGATOR ONLY, NOT AVAILABLE ELSEWHERE

Information